Roof Panel Curving Machine
The Englert 2400 panel curving machine can be brought down to a minimum radius of 36 inch in aluminum, or 100 inch in steel. This system, although rugged in design, requires a solid deck for installation, and carries the 2400 UL listing (18" width) with proper fastening.
The 2 inch profiles can be locked with a 90° fold. Panel widths for this application are infinitely adjustable from 12 inch to 28 inch in all metals and seam configurations.
Part # 01607A
Machine Technical Specs
Specs
- Length – 39.5" (100.33 cm).
- Width – 45" (114.30 cm).
- Height – 64.9" (164.85 cm).
- Weight – 617.4 lbs (280.05 kg).
Speed
- Approximately 40 ft. (12.19 m) / minute.
Minimum Radius 2"
- Steel - (24 ga) - 100" (254 cm).
- Copper - 36" (91.44 cm).
- Aluminum - 36" (91.44 cm).
Electrical Requirements
- 115 Volt, single phase, 1.0 HP AC Motor.
Materials Formed
- Steel – 29 gauge to 22 gauge (painted, galvanized, aluminized)
- Aluminum – .019" (.48 mm) to .040" (1.02 mm)
- Copper – 16 oz., 20 oz. 3/4 hard
Catalogs & Brochures
Related Products
